RT80

Portable Roughness Tester

RTP80 roughness tester, easy to handle and user-friendly, allows to characterize even the most complex surfaces, easily and conveniently. The shiny 5.7’’ colour touchscreen display combined to the icon interface, allows the operator to set the measurement parameters, moving on the piece and carrying out the analysis quickly. The results obtained and the relative tolerances can be printed immediately using the thermal printer built in the instrument. The graphs and parameters are all of interactive type, to allow the operator to choose how to present the results. RTP80 is suitable for production departments, where the measurement settings for batch analyses can be protected by password, and it is also ideal to be used in metrological laboratories where statistical analyses can be carried out on the measurements taken. RTP80 calculation unit can be connected up to 4 measurement translators for various types of pieces.

RTP80 Roughness RTP80 Roughness Data

CHARACTERISTICS:

Measurement range: ±500μm
Resolution: 0,001 μm
Cut-off lenght: 0,25 – 0,8 – 2,5 mm
Cut-off number: Selectable from 1 to 19
Traverse lenght: Up to 50 mm
Pick-up: Inductive, it can be rotated of 90° for lateral measurements
Printer Integrated, thermal printer
Measurement parameters: 48 parameters(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsm, Rdc, RPc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, RPc, PPc, Wa, Wq, Wt, Wz, Wp, Wv, Wc, WSm, Wdc, WPc, Rk, Rpk, Pvk, Mr1, Mr2, Pt, R, Rx, AR, Wte, W, AW, Wx,   Rke, Rpke, Rvke, Rmax, R3z, R3zm)
Graphs displayed: Roughness, waviness, primary, bearing capacity curve, and distribution of Ordinates.
Unit of measurement: Millimeters and inches
Interface: TFT, 5.7” colour graphic Touchscreen display and 3 waterproof membrane buttons
Languages: Italian, French, English, German, Spanish, Portuguese
Memory: Up to 1000 misure
Accessories: RTP80 roughness tester, Translator (TS4,TL90, Rotarix 55 or Rotarix 125), 110-230V battery charger, roughness sample, case, user manual

 

CONNECTABLE TRANSLATORS:

TS7 Code: 1.200: Compact and easy to handle translator, it allows taking measurements in the most difficult conditions, by simply holding it in one hand. Maximum traverse length of 25 mm
TL90 Codice: 1.201: Professional translator with internal metrological reference that allows characterizing W waviness parametersPositioning micrometrics on the piece, with traverse length of 110 mm, bistable nib for measurements with and without skid. Maximum traverse length of 50 mm.
ROTARIX 55  Code: 1.202: Rotary unit with horizontal axis for measuring radial roughness (e.g. pipes, balls) on medium-size pieces, measurement diameter from Ø3 ÷ Ø60 mm.
ROTARIX 125 : Rotary unit with vertical axis for measuring radial roughness on bulky pieces, measurement diameter from Ø10 ÷ Ø160 mm.